background image

Shure Incorporated

18/32

Challenging environments include:

Areas with few reflective surfaces such as:

Outdoors

Buildings with very high ceilings

3 or more GLX-D receivers in use

Strong Wi-Fi presence

Competitive 2.4 GHz systems in use

Note: Unlike analog TV band wireless which typically uses the same type of transmissions across manufacturers, all 2.4GHz wireless currently on the market 

use different variations of wireless transmission. These differences make it more difficult to mix and match 2.4 GHz from multiple manufacturers successfully, 

as can be done with TV band wireless solutions.

Tips and Methods to Improve Wireless System Perfor-
mance

If you encounter interference or dropouts, try the following suggestions:

Scan for the best available channel (press the channel button).

Reduce transmitter to receiver distance ­ for example, place receivers on stage with a line of sight to the front of the re­

ceiver.

Change the group for all GLX-D systems:

Single-Chanel System: use Group 4, which is optimized for single-channel use

Multi-Channel System: use Group 2, which is the most robust wireless group

Move receiver further away from Wi­Fi access points, computers, or other active 2.4 GHz sources. Recommended dis­

tance is a minimum of 3 meters (10 feet).

Disable non-critical Wi-Fi on computers, cell phones, and other portable devices

If you plan to use Wi­Fi during a performance, turn on Wi­Fi prior to turning on GLX­D and scanning for the best chan­

nel.

Keep the transmitter and receiver more than 2 meters (6 feet) apart

Avoid heavy Wi-Fi traffic activities such as downloading large files or viewing a movie.

Locate competitive 2.4 GHz receivers away from each other

Avoid placing transmitter and receiver where metal or other dense materials may be present

Move the receiver to the top of the equipment rack

Keep transmitters more than 2 meters (6 feet) apart - this is less critical at shorter receiver to transmitter distances

Note: 

If transmitters are within 6 inches of non-GLXD transmitters or microphone cartridges, audible noise is possible.

During sound check, mark trouble spots and ask presenters or performers to avoid those areas

If there is a known strong source of Wi-Fi and you specifically want to use frequencies within that Wi-Fi channel, use the 

following Group/Channel of GLX-D (best option listed first):

Wi-Fi 1: 

Group 3/Channel 8, Group 3/Channel 4

Wi-Fi 6:

 Group 3/Channel 7, Group 3/Channel 5

Wi-Fi 11:

 Group 3/Channel 2, Group 3/Channel 1

2.4 GHz Frequency Tables

The following tables list receiver channels, frequencies, and latency for each group:

Содержание GLXD14

































Отзывы: