background image

Shure Incorporated

15/32

Charging Times and Transmitter Runtimes

Use the following table to determine approximate battery runtime based on the duration of charging time. Times shown are in 

hours and minutes. GLX-D transmitters automatically power-off after approximately 1 hour to conserve battery life if the signal 

from a linked receiver is not detected.

Receiver Bay or AC Power Source 

Charging

USB Connection Charging

Transmitter Runtime

0:15

0:30

up to 1:30

0:30

1:00

up to 3:00

1:00

2:00

up to 6:00

3:00

4:00

up to 11:30*

*Storage time or excessive heat will reduce maximum runtime.

Note:

 If receiver is powered off and remains plugged in, battery will continue charging.

Important Tips for Care and Storage of Shure Rechargeable Batteries

Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.

Always store batteries and transmitters at room temperature

Ideally, batteries should be charged to approximately 40% of capacity for long-term storage

During storage, check batteries every 6 months and recharge to 40% of capacity as needed

Important: 

Always fully charge a new battery before first use.

Multiple Receiver Systems

For ease of set up, frequencies are divided into groups to best match the channel requirements for your system.

Содержание GLXD14

































Отзывы: