![background image](http://html.mh-extra.com/html/shure/axt620/axt620_instructions-manual_1262581006.webp)
6
System Information
IP Configuration
The switch is a network device and needs to be assigned
an IP address for identification on the network.
When making changes to the menu configuration settings,
you must click
Apply
to make the changes to the switch.
TFTP Transaction
In this option, you can update the firmware of the switch.
You will need to run a TFTP server on the computer con-
nected to the switch, and then enter the IP address of the
computer in the TFTP Server IP Address field. Then enter
the name of the firmware file into the 'Firmware File Name'
field and click Apply to start the upgrade process. Once
the upgrade process is complete, you should click Factory
Default on the left-hand side of the Main Page of the switch.
NOTE:
Before doing a firmware upgrade, either unplug or
power off all devices connected to the AXT620 except the
computer.
DHCP Server - Client Entries
When the DHCP server function is enabled, you can view
DHCP client information here.
This option lets you assign the system name, description,
physical location, and contact personnel. You can also look
up your firmware and kernel version here, as well as the
MAC address.
Power over Ethernet
In this option, you can manage your Power over Ethernet
options. You also can view the system’s real-time total
power consumption, output voltage for PoE ports, and the
firmware version of the PoE chip.
DHCP Server - System Configuration
When you are using multiple switches to manage numerous
devices, you can designate one switch to act as the DHCP
server. All other switches must be designated as clients with
the DHCP server set to
OFF
.
Only the server can have the DHCP switch set to
ON
.
User Authentication
In this option, you can change the user name and password
of the switch.