2
Switch
Built-in, leaf-type, non-locking, push-to-talk
Shock Mount
Internal rubber vibration isolator
Cable
Highly durable, retractable cable with effective hum
shielding, four conductors (two shielded), neoprene
jacketed with 5-pin connector
Length: 330 mm (13 in.) retracted
1.83 m (6 ft) extended
Case
Silver finish die casting with black enamel diecast grille
and stainless steel screen
Dimensions
See Figure 3
1.5 in.
3.75 cm
6.5 in.
16.5 cm
0.85 in.
2 cm
OVERALL DIMENSIONS
FIGURE 3
Certification
Conforms to European Union directives, eligible to bear
CE marking; meets European Union EMC Immunity Re-
quirements (EN 50 082–1, 1992).
CONNECTIONS
These low-impedance microphones are designed for
connection to microphone inputs rated at 75 to 300 ohms.
Using balanced-line low-impedance cables permits very
long cable lengths without affecting response or level. The
GREEN and WHITE cable leads are the microphone con-
ductors for balanced-line connections; the shield is con-
nected to the amplifier ground.
For unbalanced operation, connect the WHITE lead to
the shield, and use the GREEN lead as the microphone
conductor.
The RED and BLACK cable leads are used to control
an external relay or control circuit.
Refer to the following tables and to the wiring diagram in
Figure 4.
INPUT TYPE
WIRE
COLOR
FUNCTION
XLR
CONNECTOR
GREEN
AUDIO
PIN 2
UNBALANCED
WHITE
AUDIO GROUND
PIN 3
SHIELD
CHASSIS GROUND
PIN 1
GREEN
AUDIO +
PIN 2
BALANCED
WHITE
AUDIO –
PIN 3
SHIELD
CHASSIS GROUND
PIN 1
GREEN
GREEN
SHIELD
WHITE
GREEN
RED
BLACK
CASE GROUND
CARTRIDGE
DIRECTION TO ACTUATE
SWITCH
P4
P5
P1
P3
P2
CONNECTOR
PIN NUMBER
CODED WIRE
INTERNAL CONNECTIONS
FIGURE 4
MOUNTING
For non-handheld use, mount the 515BSM to a fixed
pipe with a
5
/
8
in.–27 thread, screw a Shure A25C swivel
adapter to the pipe, then insert the microphone in the
adapter.
To mount the 515BSM to a wall or lectern, install a
Shure A12B mounting flange, screw a Shure A25C swivel
adapter to the mounting flange, then insert the microhpne
in the adapter.
Net Weight
515BSM
380 g (13.5 oz)
. . . . . . . . . . . . . . . . . . . . . . . . .
FURNISHED ACCESSORY
1.27 mm (.050 in.) Hex Wrench
80A67
. . . . . . . . . . . .
Swivel
A25C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flange
A12B
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPLACEMENT PARTS
Cartridge
R180
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grille Assembly
RK334G
. . . . . . . . . . . . . . . . . . . . . . . .
Cable
90B4645
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windscreen
A1WS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For additional service or parts information, please con-
tact Shure’s Service department at 1–800–516–2525. Out-
side the United States, please contact your authorized
Shure Service Center.
6+85(,QFRUSRUDWHGKWWSZZZVKXUHFRP
8QLWHG6WDWHV&DQDGD/DWLQ$PHULFD&DULEEHDQ
:7RXK\$YHQXH1LOHV,/86$
3KRQH86)D[,QW¶O)D[
(XURSH0LGGOH(DVW$IULFD
6KXUH(XURSH*PE+3KRQH)D[
$VLD3DFLILF
6KXUH$VLD/LPLWHG3KRQH)D[