manualshive.com logo in svg

SHUNFENG T4, Руководство пользователя

"Газель T4 - это удобный, легкий в сборке и использовании продукт для всех любителей активного отдыха. С нашим бесплатным руководством по сборке и использованию, вы легко сможете наслаждаться всеми преимуществами этого удивительного продукта. Скачайте его с manualshive.com прямо сейчас!"

Поделиться
Скачать
background image

Trouble Recovery

33

U69M14E0.book  Page 47  Monday, June 6, 2005  2:53 PM

gency starter rope.

A. Remove foreign matter and clean lower
unit.

Q. Is fuel system obstructed?
A. Check for pinched or kinked fuel line or oth-
er obstructions in fuel system.

Q. Is fuel filter clogged?
A. Clean or replace filter.

Q. Is fuel contaminated or stale?
A. Fill tank with clean, fresh fuel.

Q. Is spark plug gap incorrect?
A. Inspect and adjust as specified.

Q. Is ignition wiring damaged or poorly con-
nected?
A. Check wires for wear or breaks. Tighten all
loose connections. Replace worn or broken
wires.

Q. Have electrical parts failed?
A. Have serviced by a yuors dealer.

Q. Is specified fuel not being used?
A. Replace fuel with specified type.

Q. Is specified engine oil not being used?
A. Check and replace oil with specified type.

Q. Is thermostat faulty or clogged?
A. Have serviced by a yours dealer.

Q. Is air vent screw closed?
A. Open the air vent screw.

Q. Is fuel pump damaged?
A. Have serviced by a yours dealer.

Q. Is fuel joint connection incorrect?

A. Connect correctly.

Q. Is heat range of spark plug incorrect?
A. Inspect spark plug and replace it with rec-
ommended type.

Q. Is engine not responding properly to shift
lever position?
A. Have serviced by a yours dealer.

Engine vibrates excessively.

Q. Is propeller damaged?
A. Have propeller repaired or replaced.

Q. Is propeller shaft damaged?
A. Have serviced by a yours dealer.

Q. Are weeds or other foreign matter tangled
on propeller?
A. Remove and clean propeller.

Q. Is motor mounting bolt loose?
A. Tighten bolt.

Q. Is steering pivot loose or damaged?
A. Tighten or have serviced by a yours
dealer.

Temporary action in emergency

Impact damage

WARNING

The outboard motor can be seriously dam-
aged by a collision while operating or
trailering. Damage could make the out-
board motor unsafe to operate.

If the outboard motor hits an object in the wa-
ter, follow the procedure below.

Содержание T4































































Отзывы:

Нет отзывов

Похожие инструкции для T4

ECS HDC-M Service Manual preview
HDC-M
Бренд: ECS Страницы: 56
ON Semiconductor MT9J003I12STCVH-GEVB User Manual preview
MT9J003I12STCVH-GEVB
Бренд: ON Semiconductor Страницы: 5
MSI 645 Ultra Manual preview
645 Ultra
Бренд: MSI Страницы: 71
JETWAY J-791A User Manual preview
J-791A
Бренд: JETWAY Страницы: 37
Mercury 55 Marathon Operation, Maintenance & Installation Manual preview
55 Marathon
Бренд: Mercury Страницы: 102
MSI X58 PLATINUM SLI - Motherboard - ATX Software User'S Manual preview
X58 PLATINUM SLI - Motherboard - ATX
Бренд: MSI Страницы: 74
Acorp 4PX400 User Manual preview
4PX400
Бренд: Acorp Страницы: 74
Linear DC2048A Demo Manual preview
DC2048A
Бренд: Linear Страницы: 16
Gigabyte GA-EP43-DS3L User Manual preview
GA-EP43-DS3L
Бренд: Gigabyte Страницы: 112
Gigabyte GA-N650SLI-DS4L User Manual preview
GA-N650SLI-DS4L
Бренд: Gigabyte Страницы: 100
Intel EMB-H61A Manual preview
EMB-H61A
Бренд: Intel Страницы: 91
Gigabyte 7CN700ID User Manual preview
7CN700ID
Бренд: Gigabyte Страницы: 44
ASROCK H570M-ITX/ac User Manual preview
H570M-ITX/ac
Бренд: ASROCK Страницы: 92
Microchip Technology EVB-LAN9252-SPI Quick Start Manual preview
EVB-LAN9252-SPI
Бренд: Microchip Technology Страницы: 22
MSI z75a-g45 series User Manual preview
z75a-g45 series
Бренд: MSI Страницы: 88
AZZA P4XE-ANB Manual preview
P4XE-ANB
Бренд: AZZA Страницы: 43
ASROCK IMB-150 User Manual preview
IMB-150
Бренд: ASROCK Страницы: 39
DFI G586SPB AIO User Manual preview
G586SPB AIO
Бренд: DFI Страницы: 65

Бренды по названию

Популярные бренды

Загрузить еще бренды