Page-3/6
Radio frequency identification area:
MENU:
Short press to switch interface, press for 3 seconds can switch to the advanced setup interface.
DOWN:
Parameters down
UP:
Parameters up
ENTER:
Confirm and save parameters
Composite Ti with RFID card, swiping cards to identify parameters and types of granules.
Please note that granules RFID card can increase the single machine specific working time. The card
is disposable, can only use once.
Interface
Main Interface:
Error information:
First line: temp. and error info. of each nozzle of machine Left shows nozzle 3, middle shows nozzle 2, right
show nozzle 1.
Second line: shows DMX address, and remaining working time 10min 22seconds
Error information
Explanation
E0 System IC
System error.
E2 Temp. Sensor
Temperature sensor was damaged.
E3 P Temp. Over
Machine stops working due to the chassis temperature is too high
E4 Time Remain
Insufficient granules or remaining time, please swiping RFID card.
E5 K Temp. Over
Machine stops working due to the inner core temperature is too high
E6 Heat Fail
Heating failed.
Control button area:
3