showtech Phantom 50 KMII, Инструкция по эксплуатации

Страница: 25 / 40

24
Ordercode: 40200
Phantom 50 MKII
07) When the display shows , press the ENTER button to open the menu.
08) Press the UP/DOWN buttons to choose between ON and OFF.
09) If set to ON, the moving head will perform a vertical (tilt) flip.
10) When the display shows , press the ENTER button.
11) The LCD display will perform a vertical flip.
12) When the display shows , press the ENTER button to open the menu.
13) Press the UP/DOWN buttons to toggle between the 3 pan range choices:
 180º
 360º
 540º
14) Press the ENTER button to confirm your choice.
15) When the display shows , press the ENTER button to open the menu.
16) Press the UP/DOWN buttons to toggle between the 3 tilt range choices:
 90º
 180º
 270º
17) Press the ENTER button to confirm your choice.
18) When the display shows , press the ENTER button to open the menu.
19) Press the UP/DOWN buttons to increase/decrease the sound sensitivity of the device.
The adjustment range is between 001-100, from low to high sound sensitivity.
20) Press the ENTER button to store changes.
21) When the display shows , press the ENTER button.
22) The device will now perform a pan/tilt engine reset.
23) When the display shows , press the ENTER button.
24) The device will now perform a full reset and will restore the factory settings.
System Information
In this menu you can see the current active mode, the active DMX address, the current software version
and the temperature of the device.
01) While in the main menu, press the MODE until the display shows .
02) Press the ENTER button to open the menu and view the settings.