SHOWTEC XS-2 Dual Beam, Руководство пользователя

Страница: 17 / 32

16
Ordercode: 40173
XS-2 Dual Beam
3.5 Tilt Reverse 1 and 2 Mode
01) When the display shows or and both those options are turned off,
the device is in normal Tilt Mode.
02) Press ENTER to open the menu and change your settings.
03) When you press Up/Down and turn this option on, the Tilt function will be reversed.
3.6 Screen Reverse Mode
01) When the display shows , but this option is turned off, the device is in normal
Display Mode.
02) Press ENTER to open the menu and change your settings.
03) When you press Up/Down and turn this option on, the Display function will be reversed.
3.7 Pan Mode
01) When the display shows , press ENTER to open the menu and change your settings.
02) You are able to set 2 different Pan Angles:
•
360º
• 180º
3.8 Tilt Mode
01) When the display shows , press ENTER to open the menu and change your settings.
02) You are able to set 3 different Tilt Angles:
•
270º
• 180º
• 090º
3.9 Reset
01) When the display shows , press ENTER to perform a full reset of the software.
The fixture will switch off and on.
3.10 Factory Settings
01) When the display shows , press ENTER to perform a full reset of the software and
restore the factory settings.
4. System Information
01) You can see the current Running Mode, the DMX Address and the current Software version.
02) Press MODE until the display shows , then press ENTER to open the menu and view your
settings.