SHOWTEC XS-2 Dual Beam, Руководство пользователя

Страница: 16 / 32

15
Ordercode: 40173
XS-2 Dual Beam
3. Advanced Mode
You can select 6 different Advanced settings when using the XS-2 Dual Beam.
01) Press MODE until the display shows , then press ENTER to open the menu and change your
settings.
02) Use the UP / DOWN buttons to select the following settings:
3.1 Slave Settings
01) When the display shows , the device is in Slave Settings Mode.
02) Press ENTER to open menu and change settings.
03) When you press Up/Down, you can choose between two options:
•
If set to S-1 , the slave device will imitate the actions performed by the master device.
• If set to S-2 , the slave device will still imitate the master device, but in reverse.
3.2 Audio Sensitivity
01) When the display shows , the device is in Audio Sensitivity Mode.
02) Press ENTER to open the menu and change your settings.
03) When you press Up/Down, you can set the audio sensitivity from 000 to 100.
3.3 Master Settings
01) When the display shows , the device is in Master Settings Mode.
02) Press ENTER to open menu and change settings.
03) When you press Up/Down, you can choose between two options.
•
If set to M-2 , the Dual Beam is seen as a separate unit in a daisy chain of other slave devices.
• If the fixture is set to M-4 , its heads are seen as independent devices. That means that each head
of every daisy-chained fixture is seen as a separate unit and their actions are not synchronized
with any other master or slave device.
3.4 Pan Reverse 1 and 2 Mode
01) When the display shows or and both those options are turned off,
the device is in normal Pan Mode.
02) Press ENTER to open the menu and change your settings.
03) When you press Up/Down and turn this option on, the Pan function will be reversed.