SHOWTEC Sunstrip Pro RGB, Руководство пользователя

Страница: 17 / 26

15
System Setup
Press the MODE button until the display shows:
Use the Up/Down buttons to change between Slave number , Wait Time , Backlight or Set Software :
1. Slave Number
Enter the Slave Number menu by pressing the FUN button.
Press the MENU button to go one step back.
You can adjust the Slave Number from 00-30 by using the UP/DOWN buttons.
2. Wait Time
Enter the Wait Time menu by pressing the FUN button.
Press the MENU button to go one step back.
You can adjust the Wait Time from 0-5 Sec. by using the UP/DOWN buttons.
3. Backlight
Enter the Backlight menu by pressing the FUN button.
Press the MENU button to go one step back.
You can adjust the dimmer value of the Backlight from 000-255 (OFF-ON) by using the UP/DOWN buttons.
4. Set Software
Enter the Set Softare menu by pressing the FUN button
Press the MENU button to go one step back.
You can reset the entire system to its factory settings.