SHOWTEC Sky Spot 4000, Руководство пользователя

Страница: 10 / 14

8
The broken lamp must be placed in a safe spot, so it cannot fall or break, because of danger
of explosion. The lamp is chemical waste and may not be thrown away. Bring this lamp to a
designated collect point for chemical waste.
When installing the new lamp, pay attention to the polarity of the lamp. The lamp has a positive and a
negative side. This is written on the lamp:
- or + .
- Side + Side
Bottom of the lamp base is - side Top of the lamp base is + side
Lamp Adjustment
You can adjust the lamp’s position by turning the screw on the backside of the Sky Spot.
The lamp position is set in the factory. As the lamps, which can be used, differ from manufacturer to
manufacturer, it can be necessary to readjust the position. The lamp must be readjusted e.g., if the light
does not seem to be evenly distributed within the ray of light.
Ignite the lamp and focus the ray of light on an even surface (wall). If the Hot Spot appears too bright, you
can weaken its intensity, by moving the lamp closer to the reflector. If the light at the outside edge of the ray
of light appears brighter as in the center, the lamp is too close to the reflector. In this case move the lamp
away from the reflector, until the light is evenly distributed and the ray of light appears bright enough.