SHOWTEC Showdesk 16, Руководство пользователя

Страница: 13 / 18

11
Run a Pattern at audio effect
1. Tap the Audio Button to enter Audio Mode.
2. Activate a chase by tapping a pattern button.
3. Move the Audio Slider slowly up until the desired effect is reached.
MIDI IN&OUT SET
Turn off input power. Press and hold Built-in Buttons 5, 6, 7, and 8 at one time. Do not release and turn on
input power. Set State is enabled.
Pattern LED 1, 2, 3 and 4 will flash.
Press Pattern Button 1 to enter MIDI Receiving and Display Segment reads IN. Press Blackout Button to
return Set State. Channels 1-16 correspond to MIDI Note.
Press Pattern Button 2 to enter MIDI Output and Display Segment will read OUT. Press Blackout Button to
return Set State.
MIDI Send & Receive
The unit will transmit and receive Note On and Note Off data via the flash buttons. Velocity is transformed
into channel intensity and note numbers correspond to the following lighting channels.
NOTE NUMBER VELOCITY FUNCTION
22-45 turn on or off programs 1-24
46-61 channel intensity turn on or off channels 1-16
62-64 turn on or off Add State (1-3)
65 DARK
66 FULL ON
67 Manual Function
68 Activate Glide Function
69 Turn on or off AUDIO
70 Step
71 BLACK OUT