SHOWTEC SC-2412, Руководство пользователя, Страница: 21 / 32

20
Ordercode: 50710
SC-2412
Insert a Scene into a Chase
01)
Record the scene or chase you wish to insert (now your scene is stored in the edit buffer), as
described on pages 15-16: Create a Scene/Chase.
02)
Select Chase < > scene mode by tapping the mode select/rec
speed (05) button. It will give you control of all 24 channels on
the selected page.
03) Press and hold down the edit/all rev (13) button.
04)
While holding down the edit/all rev (13) button, tap the flash
(03) button corresponding with the chase which you want to
edit.
05) Release the edit/all rev (13) button. The relevant scene/chase
LED will light up, indicating that the chase is in Edit mode.
06) Tap the step (17) button until you reach the scene before which
you want to insert a new scene.
07) Tap the insert/% or 255 (10) button to insert the step you have
created before.
08) Exit Edit mode.
Notes
●
A part of entering Edit mode is selecting which chase or scene you wish to edit. See section on
editing for further instructions.
● All LEDs will flash to indicate a successful insertion of the scene.