SHOWTEC SC-2412, Руководство пользователя, Страница: 14 / 32

13
Ordercode: 50710
SC-2412
Operations
Physical Fader Assignment
Use this feature to combine or unify fixture control attributes for different fixtures.
For example, if controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels
may not line up ideally on the physical faders. Use this function to re-assign the dimmer, color and gobo
channels to faders 1, 2 and 3. From now on you will be able to control the same attributes on all fixtures
using the same fader location.
01)
Select the page which the DMX channel (CHNO) you wish to
assign is on.
02) Press and hold down the record/shift (14) button and tap the
audio/page A B (16) button to toggle between page A and
page B. The selected page is shown on the LCD display (27).
03) While holding the record/shift (14) button, tap flash button #6
(03) three times.
04) Tap the flash (03) button of the DMX channel (CHNO) you want
to assign to a fader.
●
Page A selected: faders 1-24
● Page B selected: faders 25-48
05) If you want to assign a DMX channel (CHNO) to a fader from the
page different to the one you are on at the moment, press and
hold down the record/shift (14) button, while tapping the add
kill/rec exit (12) button to exit Fader assignment mode. If the
fader is on the same page, proceed with step 8.
06) Select the page which the DMX channel (CHNO) you wish to
assign is on. Press and hold down the record/shift (14) button
and tap the audio/page A B (16) button to toggle between
page A and page B. The selected page is shown on the LCD
display (27).