SHOWTEC Pixelbar 16 Q6, Руководство пользователя

Страница: 23 / 44

22
Pixelbar 16 Q6
Product code: 41308
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a linear wash light. It is suitable only for indoor installation.
This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Pixelbar 16 Q6 supports the following control modes:
●
Stand-alone: Auto operation mode (built-in chases), manual operation
● Master/Slave: Auto operation mode (built-in chases), manual operation
● DMX-512, Art-Net, sACN: 6, 8, 12, 96, 101 channels, HSV, HSI
● Kling-Net: Pixel mapping
For more information about how to connect the devices, refer to 5. Setup on pages 16–21.
To operate the device manually as a stand-alone device or in a master/slave setup:
Adjust the levels for red, green, blue, white, amber and UV in the Manual Control menu. See 6.6.5.
Manual Control on page 29 for more information.
To run one of the built-in programs in auto operation mode without a DMX controller:
Select one of the 13 built-in chases in the Auto Control menu. See 6.6.6. Auto Control on page 29 for
more information.
Set the speed of the built-in chase in the Auto Control menu. See 6.6.6. Auto Control on page 29 for
more information.
To operate the device with a DMX controller:
01) Set the DMX starting address of the device in the DMX Address menu. See 5.3.5. DMX Addressing on
page 18 and 6.6.1. DMX Address on page 28.
02) Select the DMX channel mode. See 6.6.2. Set DMX Channel Mode on page 28 for more information.
See 6.7. DMX Channels on pages 35–38 for complete overview of all DMX channels.