SHOWTEC PHANTOM 300 LED MATRIX, Руководство пользователя

Страница: 10 / 40

Ordercode: 40060
Phantom 300 LED Matrix
Backside
Fig. 02
05) Cooling fans
06) Pro power connector 100-240V IN
07) Pro power connector 100-240V OUT
08) Power switch ON/OFF
09) Fuse T5L/250V
10) RJ45 Ethernet connector OUT
11) 3-pin DMX signal connector OUT
12) 3-pin DMX signal connector IN
13) RJ45 Ethernet connector IN
Installation
Remove all packing materials from the Phantom 300 LED Matrix. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
9