SHOWTEC Performer 1500 Fresnel Q6 Скачать руководство пользователя страница 6

Страница: 6 / 44

Performer 1500 Fresnel Q6

Product code: 33130

●

References:

References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “turn the adjustment screw (02)”

●

0–255:

Defines a range of values

●

Notes:

Note: (in bold lettering) is followed by useful information or tips

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs.

Always follow the instructions provided in this user manual.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.

Attention

Indicates important information for the correct operation and use of the
product.

Important Read and observe the instructions in this document.

Electrical hazard

Hot surface

Eye damage hazard

Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with an information label. The information label is located on the backside of the
device.

The information label contains the following symbols:

This device is designed for indoor use.

This device shall not be treated as household waste.

Replace any cracked protective shield.

Minimum distance from lighted objects.

Caution: Risk of electric shock. Disconnect input power before opening.
This appliance must be earthed.

Содержание Performer 1500 Fresnel Q6













































Результаты поиска

Содержание Performer 1500 Fresnel Q6

Отзывы:

Похожие инструкции для Performer 1500 Fresnel Q6

Бренды по названию

Популярные бренды

SHOWTEC Performer 1500 Fresnel Q6, Руководство пользователя

Результаты поиска

Содержание Performer 1500 Fresnel Q6

Отзывы:

Похожие инструкции для Performer 1500 Fresnel Q6

Бренды по названию

Популярные бренды