11
Ordercode: 30317/30318
Parcan 56 Long, incl. terminal and socket
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the light effect does not operate properly, refer servicing to a technician.
Suspect two potential problem areas as: the power supply and the lamp.
01)
Power supply. Check if the unit is plugged into an appropriate power supply.
02)
The lamp. Replace the lamp. See page 9 for installing the lamp.
03)
If both appear to be O.K., plug the unit in again.
04)
If you are unable to determine the cause of the problem, do not open the Parcan, as this may
damage the unit and the warranty will become void.
05)
Return the device to your Showtec dealer.
Problem Probable
cause(s)
Solution
One or more
fixtures do not
function at all
No power to the fixture
•
Check if power is switched on and
cables are plugged in
Internal fuse blown
•
Return the device to your Showtec
dealer.
No light or lamp
cuts out
intermittently
Fixture is too hot
•
Allow the fixture to cool down
•
Make sure air vents are not
blocked
•
Turn up the air conditioning
Lamp damaged
•
Disconnect the fixture and
replace the lamp
The power supply settings do not
match local AC voltage and
frequency
•
Disconnect fixture. Check settings
and correct if necessary
