9
Ordercode: 30317/30318
Parcan 56 Long, incl. terminal and socket
Installing the Lamp
The Showtec Parcan 56 Long uses the Par 56 GX16d NSP GE lamp, 300W (ordercode
80102
), the GE Par
56 GX16d MFL GE, 300W (ordercode
80103
), the Philips Par 56 GX16d Philips, 300W (ordercode
80103P
),
the GE Par 56 GX16d WFL GE, 300W (ordercode
80104
), the Philips Par 56 GX16d Philips, 300W (ordercode
80104P
). Use only the appropriate lamp for your unit. Note that product versions, that use other lamps,
may be offered in the future. Check your product specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps of higher wattage! Lamps of higher wattage generate temperatures which the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure:
01)
Disconnect the Parcan from power before installing the lamp.
02)
Pull the fixation screw and remove the rear cover (fig. 03).
03)
Remove the fixation ring.
04)
Remove the lamp from the box and hold it by the base. Read lamp instructions. Do not touch the
lamp bulb glass. Oil on hands shortens the lamp’s lifespan. If you touch the bulb glass, wipe it off with
a clean, lint free towel and rubbing alcohol (fig. 04).
05)
Pull out the lamp holder and insert the lamp (fig. 05).
06)
Replace the fixation ring (fig. 06).
07)
Replace the rear cover.
08)
The Parcan is now ready for use.
Fig. 03
Fig. 04
Fig. 05
Fig. 06
