SHOWTEC Multi Profile Spot, Руководство пользователя

Страница: 9 / 17

7
Lens Locations
The different lenses used in the Moon Light are not interchangeable. When installing a new lens, refer to the
illustration below for proper placement. Also, remember to have the lens' color designator dot facing the
color frame.
Fig. 5
Centering and adjusting the lamp
The marked "A,B,C" three adjustive screws located on the rear lamp housing allow you to center the lamp
within the reflector and adjust its beam field (See Figure 6 mark A. B. C.).
1. Turn on the Moon Light and aim it at a flat surface.
2. Loosen (counterclockwise) or tighten (clockwise) the A, B, C three screws in turn until the lamp is
centered within the reflector and achieve an optimum flat field (most bright and most rounded).
Fig. 6