10
Order code: 41307
Maniac FX 7
Multiple Maniac fixtures (DMX512 Mode)
01)
Fasten the effect light onto firm trussing or mount it on flat surface. Leave at least 0,8 meter on all
sides for air circulation.
02)
Always use a safety cable (order code 70140 / 70141).
03)
Use a 3-pin DMX cable to connect the Maniac and other devices.
04)
Link the units as shown in Fig. 04, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the rest of the units.
05)
Supply electric power: Plug electric mains power cords into each unit's pro power socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Fig. 04
Note: Link all cables before connecting electric power!
Содержание Maniac FX 7
Страница 14: ...13 Order code 41307 Maniac FX 7 Menu Overview...
Страница 27: ...26 Order code 41307 Maniac FX 7 Notes...
Страница 28: ...2019 Showtec...