9
Operation
ONE/MIX/SEQ chasing mode(s)
Scene/Chase Running
ONE:
to run the chase singly --- that means you can only run one chase at a time.
(1)
Manual/Auto/Auido triggering mode(s)
This unit provides you three available Chase triggering mode:
You can press the ONE/MIX/SEQ button to select ONE, MIX or SEQ chasing mode to
run the chase(s) as your desire.:
MIX:
to run the chases intermixably --- that means all chases can be respectively run
at the same time.
(2)
SEQ:
to run the chases sequentially --- that means the chases will run in a sequence
that follows your operation. For example, when in the "SEQ" chasing mode, you
triggered Chase1, then Chase9, and then Chase 3, these three triggered chases will
then run in the sequence as "Chase1 Chase9 Chase3".
"
"
(3)
Manual trigger:
You can use the STEP button to run the programmed chase(s) step
by step..
(1)
Auto trigger:
You can press the RUN button to run the programmed chase(s) auto-
matically.
(2)
Note:
In Auto trigger mode, you can use the Speed fader or the "Tap Sync" button to set
a chasing speed for the running chase.
Press the "Tap Sync" button twice to establish a chasing rate, then the running
chase will run its steps in such a chasing rate.
Audio trigger:
Chase(s) can be also triggered by the Audio effect from the built-in
microphone or from the external connected sound input equipment. The Audio sensi-
tivity level can be adjusted by the Audio Sense fader as your desire.
(3)
Fade To Speed
User can press the "Fade To Speed" button to enable(its LED "on") or disable (its LED
"off") the Fade time. Note: If you set a running chase with a fade time, the fade time is
just the stepping interval that you set by the Speed fader / Tap Sync button. For example,
if you set the Speed level/chasing rate as 0.35 second (per step), that means the current
fade time is 0.35 second.
