9
Record a Scene
1)
Press and hold the Record button for 3 seconds to enter Program Mode.
2)
Select the fixture you want to program by pressing the desired Fixture button.
3)
Set the faders to the desired values.
4)
Set the proper page by pressing the Page button. You can choose Page 1 or Page 2.
5)
Press the Record button and then press the desired Scene button you want to record.
6)
Press and hold the Record button for 3 seconds to exit Program Mode.
The existing scenes will be overwritten
Play Scenes
1)
Deselect all fixtures. All LEDs next to the 4 fixture buttons must be OFF.
2)
Select the proper Page by pressing the Page button.
3)
To select the desired scene press the Scene button.
4)
Scenes can be stored on 2 pages. Each page contains 8 scenes.
Multiple scenes can be mixed together
Be sure to use the page button.
As an overview you are immediately able to view which scenes are still active on which page.
The LEDs, from the scene or chase that is still active, are on.
Delete a Scene
1)
Press and hold the Record button for 3 seconds to enter Program Mode.
2)
Select the proper Page by pressing the Page button.
3)
Press and hold the Tap Sync button. Now press the corresponding Scene button that you want to
delete.
4)
All LEDs will flash, indicating your scene has been deleted.
5)
Press and hold the Record button for 3 seconds to exit Program Mode.
Содержание LED Operator 4
Страница 1: ...LED Operator 4 V2 ORDERCODE 50716 ...
Страница 15: ......