SHOWTEC LED Operator 4, Руководство пользователя, Страница: 10 / 15

8
Operation
For more information about working with the LED Operator 4, you can also view:
Link: http://www.youtube.com/user/highliteholland
Channel Assignment
1) Scene buttons 1-8 are DMX channels 1-8.
2) Press and hold the Patch/Down button for 3 seconds. The Patch LED will light up red.
3) Press the fixture button you desire. The Fixture LED will light up blue. You can choose 4 different fixtures.
4) Press and release the channel flash button and push the scene button, that refers to the channel you
have to patch. First release the channel flash button, then release the Scene button to save the DMX
channel. All LEDs will flash, then release the scene button.
5) Press Patch button for 3 seconds to exit Patch mode.
Factory Reset
1) First turn off the device.
2) Now press and hold the Record Tap Sync together.
3) Now switch on the device.
4) The display will show 88 for 10 seconds.
5) After that all LEDs will flash 3 times.
6) The display will now show 00.
After the factory reset, the fixture is auto patched:
Fixture 1 Fixture 2 Fixture 3 Fixture 4
Red CH1 Red CH9 Red CH17 Red CH25
Green CH2 Green CH10 Green CH18 Green CH26
Blue CH3 Blue CH11 Blue CH19 Blue CH27
Master CH4 Master CH12 Master CH20 Master CH28
Unpatch Channels
1) Press and hold the Patch button for 3 seconds.
2) Select the fixture by pressing the Fixture button.
3) Press and hold the Tap Sync button. Now press the corresponding scene button that you want to
unpatch. Scene buttons 1-8 are DMX channels 1-8.
4) All LEDs will flash and your operation is successful.
3) Press the Patch button for 3 seconds to exit.
Enter Program Mode
1) Press and hold the Record button for 3 seconds.
Exit Program Mode
1) Press and hold the Record button for 3 seconds.