SHOWTEC LED Design Par18 RGB, Руководство пользователя

Страница: 6 / 26

4
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the LED Design Par is lowered from the ceiling or high joists, professional trussing systems have to
be used.
Use a clamp to mount the LED Design Par, with the mounting-bracket, to the trussing system.
The LED Design Par must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the LED Design Par, always make sure, that the area below
the installation place is blocked and staying in the area is forbidden.
The LED Design Par can be mounted in a hanging position (Fig. Above) or Upright (Fig. Below), using the
support brackets. Mounting the LED Design Par with a clamp or any other mounting bracket is
recommended, depending on the requirements of your application.
The LED Design Par can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious damage to people and property !