SHOWTEC LED Aqua Painter, Руководство пользователя

Страница: 6 / 12

4
Description of the device
Features
The LED Aqua Painter is a water submersible LED system from Showtec.
• 360 High power LEDs (120 Red, 120 Green, 120 Blue)
• DMX-controlled
• 3 Channels (R, G, B)
NOTE: Knowledge of DMX is required to fully utilize this unit.
Overview
Fig. 1
NOTE: Please make sure to also obtain the 41221 Distibutor and 41222 External PSU.
Both devices are essential for using the LED Aqua Painter.
The 41221 Distributor has to be made waterproof, before submerging the device !
Installation
Remove all packing materials from the LED Aqua Painter . Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.