SHOWTEC Kanjo Spot 60, Руководство пользователя

Страница: 23 / 28

Ordercode: 45011
Kanjo Spot 60
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the light effect does not operate properly, refer servicing to a technician.
Suspect three potential problem areas as: the power supply, the LEDs, the fuse.
01) Power supply. Check that the unit is plugged into an appropriate power supply.
02) The LEDs. Return the Kanjo to your Showtec dealer.
03) The fuse. Replace the fuse. See page 20 for replacing the fuse.
04) If all of the above appears to be O.K., plug the unit in again.
05) If you are unable to determine the cause of the problem, do not open the Kanjo, as this may
damage the unit and the warranty will become void.
06) Return the device to your Showtec dealer.
22