SHOWTEC Illumilift RGBW Turbo, Руководство пользователя

Страница: 13 / 24

12
Order code: 41166
Illumilift RGBW Turbo
The Illumilift RGBW Turbo can be operated with a controller in control mode or without the controller in
stand-alone mode.
Power the device up ONLY when the LED sphere IS INSTALLED.
Power the device up ONLY when the controller is in VERTICAL position.
The built-in winch system resets itself upon each start-up. If the controller is not in vertical
position and/or the LED sphere is not installed, it may result in twisting of the cable that may
cause damage to the built-in winch system and the warranty will become void.
Before powering the Illumilift up, always make sure that:
●
the controller is positioned VERTICALLY.
● the LED sphere is installed and secured by means of the safety eye.
● the cable tie, keeping the hoisting cable in position, is removed.
● the hoisting cable is not loose.
● the maximum cable load (2 kg) is not exceeded.
● the movement of the Illumilift is not interrupted in any way.
Control Panel
A) LED display
B) MENU button
C) UP button
D) DOWN button
E) ENTER button
Fig. 05
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Illumilift will respond to the controller.
Please note, when you use the controller, the unit has 10 channels.
When using multiple Illumilifts, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Illumilift should be 1(001); the DMX address of the second Illumilift
should be 1+10=11 (011); the DMX address of the third Illumilift should be 11+10=21 (021), etc.
Please, be sure that you do not have any overlapping channels in order to control each Illumilift
correctly. If two or more Illumilifts are addressed similarly, they will work similarly.