SHOWTEC Galaxy 1200, Руководство пользователя

Страница: 8 / 25

6
Installation
Installing the Lamp
The Showtec Galaxy 1200 uses the HMI 1200 (ordercode 80902O, 80902P) reflectorbulb as manufactured
by all popular manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage ! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure :
1. Loosen the 6 screws on the metal housing.
2. Gently remove the small metal housing.
3. Read lamp instructions. Do not touch the lamp bulb glass. (See Figure 3.)
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free
towel and rubbing alcohol.).
4. Insert the lamp into the lamp socket.
5. Put the metal housing back and fasten the screws snugly
1 2
Fig. 3