SHOWTEC DMX Recpack 4, Руководство пользователя

Страница: 8 / 36

7
Ordercode: 50822
DMX Recpack 4
Backside
Fig. 02
03)
100-240V Pro power connector Blue IN
04) Automatic fuse
05) Ground/earth connection
06) 3-pin DMX signal connector IN
Connect a light controller.
07) 3pin DMX signal connector THROUGH
Connect a light fixture.
08) 100-240V Pro power connector Gray OUT (outputs 1-4)
09) Data switch ON/OFF
Press the button to enable (green LED ON) or disable (green LED OFF) DMX data flow.
10) (D)ata/(P)ower LED indicators
11) 3-pin DMX signal connector OUT (outputs 1-4)
Connect a light fixture.
Installation
Remove all packing materials from the DMX Recpack 4. Check that all foam and plastic padding is
removed. Fit the equipment to a 19" rack. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.