15
Ordercode: 30277
Compact Power Lightset 4 RGBW
06)
With the menu option
, you can set the dimmer speed, by pressing the
Up/Down
buttons.
You can choose between Smooth or Fast.
07)
In the menu
you can set how long the display will remain ON, when no button is pressed.
08)
Press the
Up/Down
buttons to choose between 10, 20, 30 or 60 seconds. If you choose the option
“
ON
”, the display will remain continuously ON, when no button is pressed.
09)
The menu option
is for resetting the device to the factory settings.
10)
Press the
Setup
button to open the menu and then press the
Up/Down
buttons to choose
Yes
or
No
.
11)
Press the
Setup
button again to confirm your choice. If you have chosen
Yes
, the factory settings will
be restored. The fixture will start up in the Auto Run mode.
12)
In the menu option
you can set the device to
Off
or
Hold
.
13)
If you choose
Off
the fixture will blackout when there is no DMX signal.
14)
If you choose
Hold
the fixture will remember the last settings and will not go out when there is no DMX
signal.
15)
In the menu option
you can choose between
ON
or
OFF
.
16)
If you choose
ON
, you activate the tool which helps to keep multiple fixtures synchronized when
using them in master slave mode, even after a certain amount of time.
6.
Sound control Mode
With this menu you can set the sound sensitivity of the device.
01)
Press the
Mode
button until the display shows
.
02)
Press the
Setup
button to open the menu.
03)
Press the
Up/Down
buttons to set the sound sensitivity. The adjustment range is between
, from OFF to high sound sensitivity.
