SHOWTEC ACT Flood 80 RGBW, Руководство пользователя

Страница: 22 / 32

21
Order code: 34040
ACT Flood 80 RGBW
5. Fixture Test
In this menu you can perform test of the device’s parameters and adjust manually the dimmer and
strobe values.
01)
Press the UP/DOWN buttons to select one of the following 2 options:
● Auto Test: The device performs an auto test of its parameters.
● Manually Defined: See 5.1 Manually Defined for more information
02) Press the ENTER button to confirm your choice.
5.1 Manually Defined
In this submenu you can manually adjust the dimmer and strobe values.
01)
Press the UP/DOWN buttons to toggle between Red, Green, Blue, White, Dimmer and Strobe:
02) Press the ENTER button to confirm your selection and open the respective pop-up submenus where
you can adjust the values.
03) Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255.
04) Press the ENTER button to confirm your choice.
6. Fixture Information
In this menu you can view the LED operating hours and the firmware version of the device.
01)
Press the UP/DOWN buttons to select one of the following 2 options:
● Fixture Hour: Provides information about the total hours of operation of the LEDs
● Firmware Version: Shows the current firmware version
02) Press the ENTER button to confirm the selection and view the information.