SHOWTEC 51346, Руководство пользователя

Страница: 30 / 44

29
Galactic RGB-2000
Product code: 51346
DMX Mode
In this menu you can set the DMX starting address of the device.
Press the FUNC button, until the display shows DMX.
Press the ENTER button to open the menu.
Press the UP/DOWN buttons to select the DMX starting address. The selection range is 001–512.
Press the ENTER button to enable DMX control mode. The display shows the current DMX starting
address. If there is no DMX connection, the display is blinking.
Note: If you exit DMX mode, the DMX connection will be discontinued and the device will not
react to the DMX controller.
Master/Slave Mode
In this menu you can set the fixture as a slave device.
Press the FUNC button, until the display shows SLAVE.
The device is now operating in Master/Slave mode. It means that it will react the same as the master
device.
Settings
In this menu you can set the device’s settings.
Press the FUNC button, until the display shows SETTING.
Press the ENTER button to open the menu.
Press the UP/DOWN buttons to choose one of the 6 submenus:
●
COLOR
● MIRROR
● SIZE
● DMX CH
● VOIC SENS
● SHOW SPEED
Press the ENTER button to open the desired submenu.
Color
In this menu you can choose the color of the laser beam.
Press the UP/DOWN buttons to choose MULTICOLOR, SINGLE COLOR or DOUBLE COLOR.
Mirror
In this menu you can mirror the laser output.
Press the UP/DOWN buttons to choose one of the 4 mirror options:
●
1: Normal view
● 2: Vertical mirror effect
● 3: Horizontal and vertical mirror effect
● 4: Horizontal mirror effect
Size
In this menu you can set the size of the laser beam.
Press the UP/DOWN buttons to set the size of the laser beam. The adjustment range is 10–100, from small
to big.