SHOWTEC 50412, Руководство пользователя

Страница: 24 / 40

23
LED SPI-2 Install
Product code: 50412
Output 1 / Output 2
In this menu you can choose the settings for the desired Output Port.
If you have chosen Output 1, the display will show:
Press the UP/DOWN buttons to select one of the 3 submenus:
●
DMX Start Address
● Network Universe
● LED Quantity
Press the ENTER button to enter the desired menu.
If you have chosen DMX Start Address, press the UP/DOWN buttons to set the desired DMX Start
Address. The adjustment range is 001–512. Press the ENTER button to confirm your setting.
If you have chosen Network Universe, press the UP/DOWN buttons to set the Network Universe. The
adjustment range is 000–255. Press the ENTER button to confirm your setting.
If you have chosen LED Quantity, press the UP/DOWN buttons to set the LED Quantity. The adjustment
range is 000–960. Press the ENTER button to confirm your setting.
Note:
● A 12V 5m LED strip is 100 pixels and uses 300 channels
● A 24V 5m LED strip is 50 pixels and uses 150 channels
Without looking at the length of your pixel strip
1 Pixel @ 24V = 6 LEDS = 10 cm
1 Pixel @ 12V = 3 LEDS = ± 5 cm
1 Pixel @ 5V = 1 LED = ± 1,7 cm
Stand-alone Mode
In this menu you can choose the desired Stand-alone Mode.
While in the main menu, press the UP/DOWN buttons to choose Port Setup.
Press the ENTER button to enter the menu. The display will show:
Press the UP/DOWN buttons to select one of the 3 submenus:
●
User Color
● Preset Color
● Automatic
Press the ENTER button to confirm your setting.