SHOWTEC 50412, Руководство пользователя

Страница: 14 / 40

13
LED SPI-2 Install
Product code: 50412
5. Setup
Warnings and Precautions
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
DMX Connection
DMX-512 Protocol
You need a DMX serial data link to run light shows of one or more devices using a DMX-512 controller or
to run synchronized shows of two or more devices set in a master/slave operating mode.
The LED SPI-2 has 3-pin DMX signal IN and OUT connectors.
The pin assignment is as follows:
●
3-pin: pin 1 (ground), pin 2 (-), pin 3 (+)
Note:
● Maximum recommended DMX data link distance: 300 m
DMX cable connection
Remove the 3-pin Phoenix terminal DMX connector IN (05) and the 3-pin Phoenix terminal DMX
connector OUT (06).
Fig. 08
02) Connect a DMX-512 light controller to the device’s 3-pin Phoenix terminal DMX connector IN (04)
and connect light fixtures to the device’s 3-pin Phoenix terminal DMX connector THRU (05).
03) Insert the cables correctly.
Fig. 09