SHOWTEC 41394, Руководство пользователя

Страница: 36 / 44

35
Ordercode: 41394
Expression 550S
06) Gently lift up the gobo holder by 10º and then gently pull out the gobo from its position.
Fig. 08
07) Very carefully take the gobo out of the gobo holder with a pair of pliers.
08) Place the new gobo in the gobo holder. Carefully put the pinchcock back, gently press the
pinchcock a little bit together. You can use a pair of pliers.
09) Put the gobo holder back. At first, you will notice some resistance which is caused by the way in
which the holder was built.
10) Replace the maintenance caps and fasten all the screws.
Rotating Gobo Wheel
Rotating gobo wheel