SHOWTEC 41324, Руководство по эксплуатации продукта

Страница: 9 / 19

7
Backside
Fig. 2
1) LCD Display
2) Functions: Mode, Menu, Up, Down
3) 3-pin DMX signal connector (OUT)
4) 3-pin DMX signal connector (IN)
5) Microphone
6) Audio Sensitivity
7) ) IEC Connector
8) Fuse 2A
9) Earth
10) ON / OFF
When the display shows ,
the Powerblinder is in auto Mode.
When the display shows ,
the Powerblinder is sound-active.
Note: The position of the point shows which mode is active.
Before the r (Auto); after r (Audio)
Installation
Remove all packing materials from the LED PowerBlinder . Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Note : Link all cables before connecting electric power.