SHOWTEC 41324, Руководство по эксплуатации продукта

Страница: 11 / 19

9
DMX Mode
Spot Sections
The LED Powerblinder will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED will blink.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
The LED PowerBlinder system can operate as a 16-, 10-, or 7-channel DMX fixture.
Channel 1 – Mode Options
With the first channel, you can set how many channels you want to use, by choosing your desired mode.
Example: When you want to use 16 channels, you select Mode 1.
Note: For the Strobe to function, you have to set the dimmer to open and you select which Spot section
you want to strobe.
Mode 1 - 16 Channels (Channel 1 must be set to 16-49)
Channel 2 – No Function
Channel 3 – Strobe
Channel 4 – Dimmer
0-15 Off
16-49 Mode 1 (16 DMX Channels)
50-99 Mode 2 (10 DMX Channels)
100-149 Mode 3 (7 DMX Channels)
150-199 Mode 4 (Built-in Programs Auto-run)
200-255 Mode 5 (Sound-active)
0-15 Open
16-141 Strobe 1-20 Hz
142-150 Strobe effect 1 (R Slow Fade-in Strobe)
151-160 Strobe effect 2 (R Mid-speed Fade-in Strobe)
161-170 Strobe effect 3 (R Fast Fade-in Strobe)
171-180 Strobe effect 4 (R Slow Fade-out Strobe)
181-190 Strobe effect 5 (R Mid-speed Fade-out Strobe)
191-200 Strobe effect 6 (R Fast Fade-out Strobe)
201-210 Strobe effect 7 (Slow random Strobe)
211-220 Strobe effect 8 (Mid-speed random Strobe)
221-230 Strobe effect 9 (Fast random Strobe)
231-255 No Strobe
0-255 Dimmer, from closed to open (0-100%)