manualshive.com logo in svg

Showlite HDO-16, Руководство пользователя, Страница: 18 / 31

Поделиться
Скачать
Showlite HDO-16 Скачать руководство пользователя страница 18

18 

2.4 Strobe effect in Color Mode 
2.4.1 Activating Strobe Effect 

Activate the COLOR MODE. Hold down the TAP/DISPLAY button and press the 
ADD button simultaneously to activate the Strobe effect. The Strobe LED (on 
scanner knob 12) will light up to indicate this. 

 

2.4.2 Deactivating Strobe Effect 

Press and hold the TAP/DISPLAY button, then press the ADD button at the same 
time to deactivate the strobe effect. When the strobe effect is off, the strobe LED (on 
scanner knob 12) will also turn off. 

 

2.4.3 Strobe speed adjustment 

There are 2 ways to set the strobe speed. 

1) The strobe effect in color mode must be activated. You can adjust the speed of 
the strobe effect by tapping the TAP/DISPLAY button twice briefly. 

2) The strobe effect in color mode must be activated. You can adjust the tempo of 
the strobe effect by holding down the TAP/DISPLAY button and then adjusting the 
tempo of the strobe with the FADE TIME fader. 

 

2.5 RGB and RGBW Color Mode Programming 

Programming of scene and chase works the same way in Color Mode as in Scanner 
Mode -> see point 3.1.1 for scene programming and 3.2 for chase programming. 

You only need to switch from Scanner Mode to Color Mode with the MODE button. 

Then set the desired colors with the Color sliders, adjust the brightness with the 
MASTER slider (SPEED slider) and create the desired scenes and chases.

 

Содержание HDO-16
































Отзывы:

Нет отзывов