Showlite HDO-16, Руководство пользователя, Страница: 13 / 31

13
2.1.3 Addressing DMX devices
The controller is programmed to control 16 DMX channels per device. Therefore, the
fixtures that you want to control with the corresponding "SCANNER" buttons on the
unit must each be 16 channels apart.
DMX
devices
or
SCANNER
Default
setting
DMX
Start
address
DIP switch
Switch settings to the
"ON position
1 1 1
2 17 1,5
3 33 1,6
4 49 1,5,6
5 65 1,7
6 81 1,5,7
7 97 1,6,7
8 113 1 ,5,6,7
9 129 1,8
10 145 1 ,5,8
11 161 1 ,6,8
12 177 1,5,6,8
For instructions on DMX addressing, refer to the manual for your particular device.
The table above refers to a binary-configurable 9-dip switch standard fixture.
2.1.4 Copy DMX device settings
To save time, you can copy the settings of one scanner button to another scanner
button.
Example: Copying the settings from scanner 1 to scanner 2
1) Press and hold the SCANNER button you want to copy.
2) While holding down the SCANNER button, simultaneously press the desired
second SCANNER button to which you want to copy the setting and then release
both SCANNER buttons simultaneously.
3) After successful copying, all SCANNER LEDs flash briefly.