manualshive.com logo in svg

Showgear 71325, Руководство пользователя, Страница: 17 / 24

Поделиться
Скачать
Showgear 71325 Скачать руководство пользователя страница 17

 

 

 

16 

 

  

 

 

RainDome 40 cm 

Product code: 71325 

 

Setup 

To complete the setup of the device, follow the steps below: 

 

Install the device. See 4. Installation on page 11 for more information. 

 

Connect a stage luminaire. See 5.4. Connecting a Stage Luminaire to the Device on page 16 for 
more information. 

 

Install the plastic sleeve. See 5.5. Installing the Plastic Sleeve on page 17 for more information. 

 

Connect the device to power supply. See 5.6. Connecting to Power Supply on page 18 for more 
information. 

 

Connecting a Stage Luminaire to the Device 

To connect a stage luminaire, follow the steps below: 

 

Put the stage luminaire in the middle of the top plate of the RainDome. 

 

Secure the stage luminaire with a secondary suspension, for example a safety cable. Make sure that 
the secondary suspension can hold 10 times the weight of the device. Put the safety cable through 
the safety eye (06). 

 

Install the plastic sleeve. See 5.5. Installing the Plastic Sleeve on page 17 for more information. 

 

Put DMX cables through the

 

hook-and-loop fastener opening on the plastic sleeve, so that the DMX 

connectors are protected from ingress of water (Fig. 16). 

 

Connect the DMX cables to the input and output connectors of the stage luminaire. 

 

Fig. 16 

 

Connect the stage luminaire to the device with a power cable. 

 

 

Содержание 71325

























Отзывы:

Нет отзывов