Showgear 71325 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

Showgear 71325 Скачать руководство пользователя страница 15

14

RainDome 40 cm

Product code: 71325

Secure the device with a
secondary suspension, for
example a safety cable as
shown in Fig. 13. Put the
safety cable through the
safety eye (13).

Note:

Make sure that the secondary
suspension can hold 10 times the
weight of the device. If possible,
the secondary suspension should
be attached to a supporting
structure independent of the
primary suspension.

Fig. 13

5.

Setup and Operation

Warnings and Precautions

Attention
This device must be used only for the purposes it is designed for.

This device is intended for professional use as a rain cover platform for stage luminaires. This device shall
be used only in combination with the recommended plastic sleeve. It is suitable for outdoor use, only
when in operation and with the plastic sleeve installed.

●

Do not operate the device oudoors without the plastic sleeve installed. If you operate the device
without the plastic sleeve, the device has an IP20 class.

●

Do not operate the device if the plastic sleeve is not fully inflated.

●

Do not operate the device in setups that are not recommended in this user manual.

Fig. 14

«
...
13
14
15
16
17
...
»

Содержание 71325

























Отзывы:

Нет отзывов