- 3 -
1. Safety
Precautions
Warning
Intake of hazardous gas and installation in a hazardous
location are strictly prohibited.
This blower does not have an explosion-proof structure.
Intake of flammable gas or operating the blower in a location
with an explosive atmosphere may lead to explosion due to
a spark caused by static electricity or contact with an electric
device, metal, etc.
Attaching a metallic wire net to the intake
port/discharge port of the blower or duct.
If a duct is not attached to the intake port/discharge port of
the blower or if the tip opens even after the duct is attached,
make sure to attach a metallic wire net.
If a metallic wire net is not attached, part of the human body
or objects may be taken in or something taken in before may
rush out. This may cause a serious accident.
Keep your face away from around the discharge port.
Small dust, etc., taken in by the blower may rush out of the
discharge port at a high speed. If such dust enters the eye,
accidents such as loss of eyesight may occur. Make sure to
keep your face away from around the discharge port.
Operation with the guard removed is strictly prohibited.
Operation with the belt guard removed may cause your
hand or clothes to be caught, leading to an accident causing
injury or death.
When hoisting the blower, always use the hoisting
holes indicated as pull-up positions.
Using positions other than those specified to hoist the
blower may lead to an accident causing it to deform, turn
over, or fall.
Do not increase speed by changing a pulley or by using an inverter.
The increase of centrifugal force applied to the rotator or force applied by air flow pressure
may cause damage to the impeller or burnout due to overload of the motor.
