26
26.The mono MIC/LINE channels
These are the channels from Channel1 to Channel4. You
can connect balanced, low impedance microphones to the
XLR socket. On the 1/4" phone jack you can connect either
a microphone or a line level instrument.
You shall never
connect an unbalanced microphone lt the XLR socket
if you do not want to damage both the Microphone and
the Mixer.
27. Ch1, CH2, CH3 and inputs sensitivity and XLR phantom switch
By turning the switch onto the "LINE" position the
CH1, Ch2, Ch3 input can be connected to an audio
source with high level signal output. By turning these
switches onto the MIC position, CH1, CH2, Ch3 input
can be connected to a dynamic microphone with low
impedance. By turning the switch onto the "Phantom"
position it connects phantom supply for XLR pin2 and pin3
of CH1, CH2, Ch3, which is necessary to operate condenser microphone
which requires this type of external supply. It is recommended to use
this switch with the general volume set on minimum.
28.Line Out Bal/Unbal
These terminals can be connected with other appliance, such as amplifier,
recorder, etc.
29.Power Amp Output
These terminals allow connecting speakers.
27
28
29
6
Total impedance: 4 ohms
+
100V
70V
25V
COM 4
-
G
8
+
100V
70V
25V
COM 4
-
G
8
Connecting the speakers with 25V output
0 0 0
+
100V
70V
25V
COM 4
-
G
8
25V
25V
25V
7
Total impedance: 8 ohms
