Show MA-4075 Скачать руководство пользователя страница 6

11. Zone1 VOLUME  

    VOLUME controls  the output signal level of  ZONE1. 

12.LED VU-meter

     This stereo 6 segment LED-meter indicates the level of the
     overall output signal.

13.MONITOR selector

      

 

Push MONITOR button down, then it connects the signal from 

      amplifier 1 to monitor volume. Release the button, then it cuts off the signal 
      connection to monitor volume. The other three buttons are operated in the 
      same way.

14. PL

      This LED is the power indicator. When the amplifier is powered on, this LED
      lights up. When the amplifier is powered off, this LED lights off. 

15. Power  switch

      When the switch is set in the position ON, the unit is powered 
      on. When the switch is set in the position OFF, the unit is 
      powered off.        

POWER

ON

OFF

PL

14

15

The Rear Panel 

16. Intelligent fan

 

      This is an intelligent fan. When the temperature is below 50

,

       the fan stops running. When the temperature is abov e 50

, it 

      starts to run and the fan increases running speed as the 
      temperature is rising. 

17. AC Input

       This inlet connects the unit with the main power.

18. AC fuse

      The fuse protects the alternating current circuit of the unit, 
      and the fuse can only be replaced in the event of fuse 
      damage. 

16

17

18

4

MON

VOLUME

ZONE 1

11

12 13

G

+

-

+

T

R

G

Monitor
Line Out

1W 

8

 

Monitor

Priority

Tel. Paging

Volume

Zone

Main Power

115/230V~50/60Hz

Ch.5

Line

Ch.4

Line

Ch.4

Ch.3

Ch.2

Ch.1

TEL

Phantom

Line

Mic

Phantom

Line

Mic

Phantom

Line

Mic

Zone 1

G

+

-

Com 4

8

25V 70V 100V

Zone 2

G

+

-

Com 4

8

25V 70V 100V

Zone 3

G

+

-

Com 4

8

25V 70V 100V

Zone 4

G

+

-

Com 4

8

25V 70V 100V

AC Fuse:

110-120V: T6.3AL 250V
220-240V: T3.15AL 250V

Caution:

 

Replace fuse only with same and rated type!

Attention:

Afin de reduire le risque d'incendie remplacer seul par un 
fusible de meme type!

Caution: 

To reduce the risk of fire or electric shock. Do not expose 
this appliance to rain or moisture. Do not remove cover. 
There are no user serviceable parts inside. Refer servicing 
to qualified service personnel.

Attention: 

Pour reduir les risques d' incendie ou de choc electrique 
ne pas exposer a la pluie ou l' humidite. Ne pas enlever 
le couvercle. Aucun reglage al' interieur. Pour reparation 
consulter une personne qualifiee.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : 

SHOCK HAZARD - DO NOT OPEN 

RISK OF FIRE-REPLACE FUSE AS MARKED.

Line Out Bal./Unbal.

Power Amp. Output

Line Out Bal./Unbal.

Power Amp. Output

Line Out Bal./Unbal.

Power Amp. Output

Line Out Bal./Unbal.

Power Amp. Output

CAUTION

INSTALLATION NOTES

At all times , the amplifier has to be operated under appropriate conditions. This 
includes tha t the operation location provided sufficient ventilation and the device
can not be exposed to direct sunlight or the direct radiation or reflection from any heat
source. Installing the loudspeaker systems choose a location that gets not affected  
by extreme and /or constant vibration or other mechanical oscillation . Also make  
sure that the speakers are installed at locations that are free from dust and /or 
moisture. 

CAUTION

We strongly recommend that you leave the connection of the appliance to the qualifie d 
and experienced service technician who is specialized in connecting electrical 
and electronic equipment. Do not take the risk of Electro-shock hazard. To reduce 
the risk of Electro-shock, all connections have to be acco mpl ishe d before it is 
permissible to connect the amplifier with the main supply. Before connecting the appliance
to the mains supply, once again make sure that all connections are carried out correctly
and that no short-circuit exist. The overall sound reinforcem ent inst allati on has to 
be in accordance to the laws, regulations, standards, and guidelines that are relevant
and applicable in that country where the equipment is going to be operated.

AC POWER SUPPLY
CAUTION

Before using the amplifier for the first time, make sure that the appliance voltage
is corret. Connect the amplifier only to grounded mains outlets. Connecting the amplifier
 to the  mains  supply (115/230Vac) has to be  accomplished by inserting the supplied mains
 cord into the corresponding socket . 

Speaker

 Horn speaker
 

Microphone

Desk Top Microphone

Sound column

Contact

"VOICE PRIORITY"

Speaker

Aux.signal

Mains

AM/FM tuner

CD player

      Cassette recorder

 Amplifier
 

 Recorder
 

9

Содержание MA-4075









Отзывы: