6
Channel 1 TRS (1/4") jack
Channel 2 Speakon NL-4R
Connect the amplifier to your speakers using these speakon jacks.
Channel 2 TRS (1/4") jack
Limit Switch
Control the built-in limiter on/off.
Exhaust Vents
Air is drawn from front grilles, flown through the unit and heat sink, and then exhausted via the rear
vents. Do not block or impede the air flow through these vents and keep the vent areas free of
foreign materials.
Channel 2 TRS Input
This TRS(1/4') jack will accept line level signal sources by means of cables fit with standard 1/4"
phone plug.
Signal Smart Switch
Use this switch to select the operating mode of the amplifier. The switch functions as follows:
STEREO: input 1 to CH 1 amp, input 2 to CH 2 amp; BRIDGE: input 1 to Mono Bridge amps.
Channel 1 Speakon NL-4R
Connect the amplifier to your speakers using these speakon jacks.
Connect the amplifier to your speakers using these speakon jacks.
Connect the amplifier to your speakers using these speakon jacks.
110-120V
110-120V
220-240V
220-240V
110-120V
110-120V
220-240V
220-240V
9
Two bridge mono amplifiers can be patched together (operated in mono mode) by connecting signal
cable between their input jacks. The signal smart switch must be set to the bridge position.
Patching two bridge mono mode system
PROFESSIONAL
AMPLIFIER
