Show Tec Galactic TXT, Руководство пользователя

Страница: 12 / 40

11
Ordercode: 51342
Galactic TXT
Backside
Fig. 02
09) Interlock
10) Remote control plug
11) 3-pin DMX signal connector OUT
12) 3-pin DMX signal connector IN
13) PS/2 keyboard connector
14) Power switch ON/OFF
15) Ground/Earth connection
16) IEC power connector 100- Fuse T1A/250V
17) Cooling fan
18) Safety eye
19) LED d control b LED indicators
Installation
Remove all packing materials from the Galactic. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be sound-controlled as it is equipped
with a built-in microphone.