Show Tec Astro 360 XL, Руководство пользователя

Страница: 12 / 40

11
Ordercode: 43024
Astro 360 XL
Control Modes
There are 6 modes:
• Auto
• Manual
• Sound-controlled
• IR
• Master/Slave
• DMX-512 (20CH, 52 CH)
One Astro (Auto, Manual and IR)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the Astro is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 17-18 for more information about the Auto, Manual and IR modes.
One Astro (Sound-controlled)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Turn on the music. If the device is set to sound-control, then the Astro will react to the beat of the
music. Please see page 17 for more information about the sound-control options.
Multiple Astros (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin XLR cable to connect the Astro.
The pins: 01) Earth
02) Signal -
03) Signal +
03)
Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on page 17-18 and 24 (Auto,
Manual, Sound-controlled and IR). This means that you can set your desired operation mode on the
master device and all slave devices will react the same as the master device.
Multiple Astros (Master/Slave control)
Fig. 04