Show Tec Astro 360 XL, Руководство пользователя

Страница: 11 / 40

10
Ordercode: 43024
Astro 360 XL
Backside
Fig. 03
03)
3-pin DMX signal connector IN
04) 3-pin DMX signal connector OUT
05) Safety eye
06) IEC power connector 100-240V IN
07) IEC power connector 100-240V OUT
08) Fuse F3AL/250V
09) Ground/earth connection
Installation
Remove all packing materials from the Astro 360 XL. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.