ShoreTel Mobility Router 6000 Installation
Installing the Mobility Router
1
6
ShoreTel Mobility Router 6000 Series Hardware Installation Guide
Figure 1-4. Installing Rear Inner Rails
To install the rear inner rails:
1
On one side of the Mobility Router, position one of the rear inner rails so that the arrow
next to the “Back” text is pointing toward the back of the chassis. The side with the arrow
and text faces away from the Mobility Router.
2
Align the four square holes on the rear inner rail with the hooks on the right side of the
Mobility Router.
3
Slide the rail toward the front inner rail so that the holes of the rail line up with the holes
on the Mobility Router.
4
Attach the rail to the Mobility Router using M4 flat head screws.
5
For the other side of the Mobility Router, repeat Steps 1 through 4.
1.5.3 Attaching the Rack Rails to the Rack
After assembling the rack rails, attach them to the rack.
To attach the rack rails to the rack:
1
Locate where to install the Mobility Router in the rack.
2
Place one rack rail at the location in the rack, making sure of the following:
Sliding rail guide faces the inside of the rack.
End of the rail labeled “Front” is at the front of the rack.
End of the rail labeled “Back” is at the back of the rack.
3
Attach the rack rail to the rack by inserting screws in the brackets at the ends of the rack
rail.
